SK Tapping

Navigation: Home /SK (DIN 69871) / Tapping Collet Chuck Holder

SK DIN 69871

PRODUCTS

TAPPING COLLET CHUCK HOLDER
Rigid Tapping Machines

Taper ISO	Part No. for JIS 6339 (MAS 403) - Form A Coolant Thro Pull stud	Suitable for Collet	Tapping Size	L	D	Nut	Spanner	Approx Wt in Kgs.
40	FT BT40 TCH ER 32 125	ER 32	M5 - M30	125	50	NUT ER 32	SP ER 32 W	2.3
45	FT BT50 TCH ER 32 125	ER 32	M5 - M30	125	50	NUT ER 32	SP ER 32 W	3.2
50	FT SK50 TCH ER 32 125	ER 32	M5 - M30	125	50	NUT ER 32	SP ER 32 W	4.3

i

HOW TO USE
1. The Collet & Nut are assembled as per normal collet chuck.
2. Insert tap into the collet and tighten the clamping Screw to ensure the square of the tap is clamped and
the tap is centered.
3. Tighten the collet nut to clamp the diameter of Tap.
4. Ensure that the collet nut & the clamping screw of tap square are tightened before mounting on
machine.

The above Tapping Collet Chucks are designed to perform Tapping with Synchronised Feed Mechanism. Collets, Collet Nuts & Spanners are the same as other Standard ER Collet Chuck Holders.

i

Collet Nut supplied as part of the Chuck.
Spanner to be ordered seperately.

Click here for Collets & Accessories

Click here for Pul Studs

TAPPING COLLET CHUCK HOLDER Rigid Tapping Machines

i

i

TAPPING COLLET CHUCK HOLDER
Rigid Tapping Machines